Removing The Pickup Assembly 1 - Canon iR3570 Service Manual

[4]

8.8.8.5 Removing the Pickup Assembly 1

iR2270 / iR2870 / iR3570 / iR4570 / / iR2270N / / iR2870N / / iR3570N /
/ iR4570N / iR2230 / / / iR3530 /
1) Slide out the cassette 1/2.
2) Disconnect that 3 connectors [1]; then, free the harness from the 2 wire
saddles [2] and the 2 clamps [3].
3) Remove the 4 screws [1], and take out the pickup unit 1 [2].
8.8.8.6 Removing the Pickup Assembly 2
iR2270 / iR2870 / iR3570 / iR4570 / / iR2270N / / iR2870N / / iR3570N /
/ iR4570N / iR2230 / / / iR3530 /
1) Slide out the cassette 1/2.
2) Disconnect the connector [1], and free the harness from the guide; then,
remove the 4 screws [2], and detach the pickup assembly 2 [3].
[2]
[1]
[3]
F-8-171
F-8-172
F-8-173
8.8.8.7 Removing the Sensor Mounting Plate
iR2270 / iR2870 / iR3570 / iR4570 / / iR2270N / / iR2870N / / iR3570N /
/ iR4570N / iR2230 / / / iR3530 /
1) Remove the 2 TP screws [1] and the binding screw [2] from the rear of the
pickup assembly, and detach the bracket [3].
0007-6614
Pickup Unit 1
Pickup Unit 2
2) Disconnect the connector [1], and remove the screw; then, detach the
cassette pickup solenoid [3].
3) Remove the bushing and the 5 screws [4]; then, detach the sensor base [5].
0007-6615
Chapter 8
F-8-174
F-8-175
F-8-176
0008-1508
8-59