Removing The Right Cover (Rear); Removing The Right Door; Parts Replacement Procedure - Canon iR3570 Service Manual

Chapter 8
An image is formed for the 1st side of the 5th sheet.
5
4
3
2
1
The 5th sheet is delivered.

8.8 Parts Replacement Procedure

8.8.1 Pick-up Unit 1

8.8.1.1 Removing the Right Cover (rear)

iR2270 / iR2870 / iR3570 / iR4570 / / iR2270N / / iR2870N / / iR3570N /
/ iR4570N / iR2230 / / / iR3530 /
1) Open the pedestal right door [1]. (if equipped with a 2-Cassette Pedestal-
Y2)
2) Open the right lower door [2].
3) Remove the 5 screws [3], and detach the right cover (rear) [4].
[2]
[1]

8.8.1.2 Removing the Right Door

iR3570 / iR4570 / / iR3570N / / iR4570N / iR2230 / / / iR3530 /
1) Open the right door.
2) Remove the screw [1], and detach the fixing plate [2].
8-46
F-8-90
[3]
[3]
[3]
[4]
F-8-91
F-8-92
3) Remove the joint shaft [1], and free the extension delivery unit [2] from
the right door.
0007-6551
4) Disconnect the connector [1], and remove the reuse band [2]; then, remove
the 2 screws (M4x8; RS tightening).
5) While freeing the hinge assembly [2], detach the right door.
0007-6552
Attaching the Right Door
1) Match the hinge [1] found at the bottom of the right door against the lug.
2) Engage the hinge [2] found on the top of the right door with the hook
found on the side plate.
F-8-93
F-8-94
F-8-95
F-8-96