Removing The Right Door - Canon iR3570 Service Manual

3) Remove the joint shaft [1], and free the extension delivery unit [2] from
the right door.
4) Disconnect the connector [1], and remove the reuse band [2]; then, remove
the 2 screws (M4x8; RS tightening).
5) While freeing the hinge assembly [2], detach the right door.
Attaching the Right Door
1) Match the hinge [1] found at the bottom of the right door against the lug.
2) Engage the hinge [2] found on the top of the right door with the hook
found on the side plate.
F-8-388
F-8-389
F-8-390
F-8-391
When tightening the 2 screws used to fix the hinge in place, be sure to close
the right door first.

8.8.23.3 Removing the Right Door

iR2270 / iR2870 / / iR2270N / / iR2870N / iR2230 / / / iR3530 /
1) Open the right door.
2) Remove the reuse band [1], and disconnect the connector [2].
3) Remove the 2 screws (M4x8; RS tightening), and detach the right door.
Attaching the Right Door
1) Match the hinge [1] found at the bottom of the right door against the lug.
2) Engage the hinge [2] found on the top of the right door with the hook
found on the side plate.
Chapter 8
F-8-392
F-8-393
F-8-394
0007-7366
8-93