Removing The Right Door - Canon iR3570 Service Manual

Chapter 8

8.8.4.3 Removing the Right Door

iR2270 / iR2870 / / iR2270N / / iR2870N / iR2230 / / / iR3530 /
1) Open the right door.
2) Remove the reuse band [1], and disconnect the connector [2].
3) Remove the 2 screws (M4x8; RS tightening), and detach the right door.
Attaching the Right Door
1) Match the hinge [1] found at the bottom of the right door against the lug.
2) Engage the hinge [2] found on the top of the right door with the hook
found on the side plate.
When tightening the 2 screws used to fix the hinge in place, be sure to close
the right door first.
8.8.4.4 Removing the Right Cover (lower front)
iR2270 / iR2870 / iR3570 / iR4570 / / iR2270N / / iR2870N / / iR3570N /
/ iR4570N / iR2230 / / / iR3530 /
1) Open the right door [1] of the pedestal (if a 2-Cassette Pedestal-Y1 is
installed).
2) Open the lower right cover [2].
8-50
F-8-115
F-8-116
F-8-117
3) Remove the 2 screws, and detach the right cover (lower front) [3].
0007-7331
8.8.4.5 Removing the Pickup Assembly 1
iR2270 / iR2870 / iR3570 / iR4570 / / iR2270N / / iR2870N / / iR3570N /
/ iR4570N / iR2230 / / / iR3530 /
1) Slide out the cassette 1/2.
2) Disconnect the 3 connectors [1]; then, free the harness from the 2 wire
saddles [2] and the 2 clamps [3].
3) Remove the 4 screws [1], and take out the pickup unit 1 [2].
8.8.4.6 Removing the Pickup Assembly 2
iR2270 / iR2870 / iR3570 / iR4570 / / iR2270N / / iR2870N / / iR3570N /
/ iR4570N / iR2230 / / / iR3530 /
1) Slide out the cassette 1/2.
2) Disconnect the connector [1], and free the harness from the guide; then,
remove the 4 screws [2], and detach the pickup assembly 2 [3].
0007-6562
[2]
[3] [1]
F-8-118
F-8-119
F-8-120
0007-6564
0007-6565