Canon iR3570 Service Manual page 144

Chapter 2
16) Fix the 3 wire saddles [2] with the rear cover [1].
17) Fix it with 3 wire saddles [2] so that there is no bending of the cable [1].
18) Connect the power cable to the power plug.
19) Turn ON the main power switch.
20) Check if the voice operation board is recognized.
Service mode.
Select COPIER > DISPLAY > ACC-STS > PCI 1.
If "Voice Operation" is displayed, that means that the voice operation board is correctly recognized.
2. Setting After Installation
To use 'Voice Operation Kit' after power-on, it is necessary to set the followings.
1) Select [Additional Function] > [System Settings] > [Voice Navigation Management Settings] > [Use Voice Guide].
2) Select ON key (Default: OFF)
3) Press OK key.
3. Operation Check
<When Using the Voice Operation Kit>
1) Press the reset key or the voice recognition button [1] three seconds or longer.
2) Select the voice mode type (Voice Guide + Recognition/Voice Guide/Voice Recognition) on the control panel, and press [OK].
2-70
[1]
F-2-224
[2]
F-2-225
[1]
F-2-226
[1]