Removing The Main Drive Motor - Canon iR3570 Service Manual

Chapter 10
Do not touch the screws that are glued in place.

10.5.14.3 Removing the Main Drive Motor

iR3570 / iR4570 / / iR3570N / / iR4570N / iR2230 / / / iR3530 /
1) Remove the 4 screws [1], and detach the main drive motor [2].
Points to Note During the Work
Be sure that the 2 timing belts [2] are fitted to the shaft [1] of the main drive
motor as shown.
10-44
F-10-222
F-10-223
Adjusting the Tension of the Main Drive Motor
1) Temporarily fix the main drive motor in place to the main motor base.
2) So that the motor gear [1] and the teeth [2] of the pulley mesh correctly,
move the motor in the direction of the arrow.
3) Tighten the screws [1] of the main drive motor in the order indicated.
0007-6421
10.5.14.4 Removing the Main Drive Motor
iR2270 / iR2870 / / iR2270N / / iR2870N / iR2230 / / / iR3530 /
1) Disconnect the 2 connectors [1].
2) Remove the 4 screws [1], and detach the main dive motor [2].
F-10-224
F-10-225
F-10-226
F-10-227
0007-7369