Control Panel Cpu Pcb; Removing The Control Panel - Canon iR3570 Service Manual

Chapter 10
F-10-109
6)Remove the self-tapping screws [1] and the flat-head screw [2]; then,
detach the control panel frame [3].
F-10-110
Routing the Harness When Mounting the Control Panel Frame
1.Check to be sure that the inverter harness is routed [1] as shown in the fig-
ure.
2.After mounting the control panel frame, be sure to route the inverter har-
ness through the edge saddle [1].
10.5.7.8 Removing the Control Panel Key Switch PCB
iR2230 / / / iR3530 /
1)Remove the 5 self-tapping screws [1], and detach the control panel key
switch PCB [2].
10-28
F-10-111
F-10-112

10.5.8 Control Panel CPU PCB

10.5.8.1 Removing the Control Panel

iR2270 / iR2870 / iR3570 / iR4570 / / iR2270N / / iR2870N / / iR3570N /
/ iR4570N
1) Remove the rubber cap [1], and remove the screw [2].
2) Open the right door [1].
3) Remove the 2 screws [1].
4) Slide the control panel [1] in the direction of the arrow.
0009-2854
F-10-113
F-10-114
F-10-115
F-10-116
0007-7565