Alarm Code - Canon iR3570 Service Manual

0048
0071
0090
0091
0092
0093
0094
0095

15.5 Alarm Code

15.5.1 Alarm Code
iR2270 / iR2870 / iR3570 / iR4570 / / / /
Location code
02 scanner system
04 pickup/feed system
05 ADF general
61 finisher
62 saddle stitcher
65 puncher
15.5.2 Alarm Code
iR2230 / / iR3530 /
Location code
02 Scanner
04 Pickup/feeder
Code Jam
1st sheet delivery sensor
stationary
timing error
ADF open
user ADF open
ADF cover open
user cover open
initial stationary
pickup fault
Description
0002
0008
0011
0012
0013
0014
0018
0001
0002
0003
0004
0005
0006
0007
0008
0009
0010
0001
0001
0001
Alarm Code
0002
0008
0011
0012
0013
0014
0018
Sensor notation
PI4 The 1st original has been identified as a
delivery sensor stationary jam.
TIMING NG The software sequence fails to end normally
within a specific period of time.
reader unit sensor The ADF has been opened while the
machine is in operation (while the drive
system is in operation).
reader unit sensor The ADF has been opened while the
machine is in operation (while the drive
system is at rest).
PI10 The ADF cover has been opened while the
machine is in operation (while the drive
system is in operation).
PI10 The ADF cover has been opened while the
machine is in operation (while the drive
system is at rest).
PI2,PI3,PI4 The presence of paper is detected inside the
feeder when the 1st sheet is being picked up.
PICKUP NG With no original in the tray, the pickup signal
is received for 2 sec.
T-15-16
indication of soiling of glass in stream reading mode
optional deck lifter error
1st cassette retry alarm
2nd cassette retry alarm
3rd cassette retry alarm
4th cassette retry alarm
optional deck retry alarm
Upper limit of the post-separation sensor exceeds the specified
value
Lower limit of the post-separation sensor exceeds the specified
value.
Upper limit of the reed sensor exceeds the specified value.
Lower limit of the reed sensor exceeds the specified value.
Upper limit of the delivery reversal sensor exceeds the specified
value.
Lower limit of the delivery reversal sensor exceeds the specified
value.
Insufficient light intensity of the post-separation sensor
Insufficient light intensity of the read sensor
Insufficient light intensity of the delivery reversal sensor
The separation alarm is continuously given.
no staple
no stitch staple
punch waste case full
T-15-17
alerts to soiling on glass in stream reading mode
accessory deck lifter error
1st cassette retry alarm
2nd cassette retry alarm
3rd cassette retry alarm
4th cassette retry alarm
accessory deck retry alarm
Description
Chapter 15
0008-0978
0009-4187
15-23