5) Free the harness [2] from the clamp [1].
6) Disconnect the connector [1], and detach the control panel.
10.5.8.2 Removing the Control Panel Base Cover
iR2270 / iR2870 / iR3570 / iR4570 / / iR2270N / / iR2870N / / iR3570N /
/ iR4570N
1) Remove the 4 screws [1], and detach the control panel base cover [2].
10.5.8.3 Removing the Controller Panel CPU PCB
iR2270 / iR2870 / iR3570 / iR4570 / / iR2270N / / iR2870N / / iR3570N /
/ iR4570N
1) Disconnect the 3 connectors [1] of the cable used between control panel
PCB and the control panel key switch PCB.
2) Disconnect the 2 connectors [2] used between the control panel PCB and
the control panel LCD.
Be sure to move the stopper in the direction of the arrow. Each of the 2
stoppers has its own direction of movement.
3) Disconnect the control panel cable [4].
4) Remove the 4 TP screws [5], and detach the control panel PCB [6].
F-10-117
F-10-118
F-10-119
F-10-120
10.5.8.4 Removing the Control Panel
iR2230 / / / iR3530 /
1) Open the right door [1].
2) Remove the 2 screws [1].
0007-7566
3) Remove the rubber cap [1], and remove the screw [2].
4) Slide the control panel in the direction of the arrow.
0007-7567
5) Disconnect the connector [1], and detach the control panel.
Chapter 10
F-10-121
F-10-122
F-10-123
F-10-124
0009-2837
10-29