7) Mount the speaker unit (lower) [1].
- 1 screw (binding; M3X16) [2]
- 1 screw (binding; M4X16) [3]
8) Mount the speaker unit (upper) [1] on the speaker unit (lower), fix them with a screw (binding; M4X6) [2] from beneath.
9) Detach the cover [1] on the cable guide.
10) Peel off the released paper of the cable guide [1] and affix it to the host machine as shown in the figure.
A: When a card reader is not mounted on the host machine
The right side --- 2 places
[2]
[3]
[1]
F-2-193
[1]
[2]
[3]
F-2-194
[1]
[2]
F-2-195
[1]
F-2-196
Chapter 2
2-59