Removing The Front Cover Unit - Canon iR3570 Service Manual

1) Open the pedestal right door [1]. (if equipped with a 2-Cassette Pedestal-
Y2)
2) Open the right lower door [2].
3) Remove the 5 screws [3], and detach the right cover (rear) [4].
[2]
[1]

8.8.25.2 Removing the Front Cover Unit

iR2270 / iR2870 / iR3570 / iR4570 / / iR2270N / / iR2870N / / iR3570N /
/ iR4570N / iR2230 / / / iR3530 /
1) Open the front cover [1].
2) Remove the face cover rubber [1].
3) Remove the binding screw [2].
4) Remove the RS tightening screw [3].
5) Detach the front cover unit [4] by moving it in the direction of the arrow.
8.8.25.3 Removing the Delivery Tray
iR2270 / iR2870 / iR3570 / iR4570 / / iR2270N / / iR2870N / / iR3570N /
/ iR4570N / iR2230 / / / iR3530 /
1) Loosen the screw [1].
2) Remove the screw [2].
3) Detach the delivery tray [3].
[3]
[3]
[3]
[4]
F-8-401
F-8-402
F-8-403
8.8.25.4 Removing the Right Door
iR3570 / iR4570 / / iR3570N / / iR4570N / iR2230 / / / iR3530 /
1) Open the right door.
0007-6763
2) Remove the screw [1], and detach the fixing plate [2].
3) Remove the joint shaft [1], and free the extension delivery unit [2] from
the right door.
4) Disconnect the connector [1], and remove the reuse band [2]; then, remove
0007-6765
the 2 screws (M4x8; RS tightening).
Chapter 8
F-8-404
F-8-405
F-8-406
F-8-407
0007-6766
8-95