Canon iR3570 Service Manual page 119

14) Attach the harness [1] to the rear end plate of the paper deck with the 2 screws [2] (M4X8).
15) Wrap the harness [1] around the cable guide [2] on the power cord mount. (One and a half turn)
16) Connect each of the connectors at both ends of the harness unit to the heater connector and the AC power supply connector respectively.
17) Attach the external cover of the paper deck in the following orders.
[1] Upper cover (Make sure that the cable is not stuck in) (M4-8: 2 screws)
[2]
Insert
Insert
[1]
F-2-158
[2]
[1]
[2]
F-2-159
[2]
F-2-160
[3]
[1]
[2]
Chapter 2
2-45