Chapter 10
1) Disconnect the 2 connectors [1].
2) Remove the 4 screws [1], and detach the fixing drive motor [2].
10.5.16 Right Door
10.5.16.1 Removing the Right Cover (rear)
iR2270 / iR2870 / iR3570 / iR4570 / / iR2270N / / iR2870N / / iR3570N /
/ iR4570N / iR2230 / / / iR3530 /
1) Open the pedestal right door [1]. (if equipped with a 2-Cassette Pedestal-
Y2)
2) Open the right lower door [2].
3) Remove the 5 screws [3], and detach the right cover (rear) [4].
[2]
[1]
10.5.16.2 Removing the Right Door
iR3570 / iR4570 / / iR3570N / / iR4570N / iR2230 / / / iR3530 /
1) Open the right door.
10-46
F-10-234
F-10-235
[3]
[3]
[3]
[4]
F-10-236
2) Remove the screw [1], and detach the fixing plate [2].
3) Remove the joint shaft [1], and free the extension delivery unit [2] from
the right door.
0007-7020
4) Disconnect the connector [1], and remove the reuse band [2]; then, remove
the 2 screws (M4x8; RS tightening).
5) While freeing the hinge assembly [2], detach the right door.
0007-6444
Attaching the Right Door
F-10-237
F-10-238
F-10-239
F-10-240
F-10-241