Cassette Paper Level Sensor (A/B) - Canon iR3570 Service Manual

8.8.10 Cassette Paper Level Sensor (A/B)

8.8.10.1 Removing the Right Cover (rear)
iR2270 / iR2870 / iR3570 / iR4570 / / iR2270N / / iR2870N / / iR3570N /
/ iR4570N / iR2230 / / / iR3530
1) Open the pedestal right door [1]. (if equipped with a 2-Cassette Pedestal-
Y2)
2) Open the right lower door [2].
3) Remove the 5 screws [3], and detach the right cover (rear) [4].
[2]
[1]
8.8.10.2 Removing the Right Door
iR3570 / iR4570 / / iR3570N / / iR4570N / iR2230 / / / iR3530
1) Open the right door.
2) Remove the screw [1], and detach the fixing plate [2].
F-8-196
[3]
[3]
[3]
[4]
F-8-197
F-8-198
3) Remove the joint shaft [1], and free the extension delivery unit [2] from
the right door.
0007-6627
4) Disconnect the connector [1], and remove the reuse band [2]; then, remove
the 2 screws (M4x8; RS tightening).
5) While freeing the hinge assembly [2], detach the right door.
0007-6656
Attaching the Right Door
1) Match the hinge [1] found at the bottom of the right door against the lug.
2) Engage the hinge [2] found on the top of the right door with the hook
found on the side plate.
Chapter 8
F-8-199
F-8-200
F-8-201
F-8-202
8-63