Feeder - Canon iR3570 Service Manual

Chapter 16
TRS-DATA
<SYSTEM>
DOWNLOAD Switching to Download mode
CHK-TYPE
HD-CHECK
HD-CLEAR

16.5.2 FEEDER

16.5.2.1 Feeder List
iR2270 / iR2870 / iR3570 / iR4570 / / / / / iR2230 / / / iR3530 /
FEEDER >FUNCTION
16-30
COPIER > FUNCTION > MISC-P
Sub-item
Transferring memory received data to the box
<Operating procedure>
1) Select this item.
2) Press the OK key to start data transfer.
COPIER > FUNCTION > SYSTEM
Sub-item
<Operating procedure>
1) Select this item.
2) Press the OK button to enter Download mode.
Specifying a partition number for executing HD-CHK
<Operating procedure>
1) Select this item.
2) Select a partition number with the ten-key pad.
0: Entire HDD
1: Image accumulation area
2: General-purpose file (user-defined data/various log data/PDL spool data/image
data management information) storage area
3: PDL-related file storage area
4: Firmware/address book/file storage area
5: MEAP area
6: Address book area
Remarks: HD-CLEAR shall be indispensable for 4 and 6.
Checking and restoring the partition specified by CHK-TYPE
<Operating procedure>
1) Select this item.
2) Press the OK key.
3) The result (1:OK, 2:NG (hardware), 3:NG (software) restored/alternative sector)
is displayed.
Initializing the partition specified by CHK-TYPE
<Operating procedure>
1) Select this item.
2) Press the OK key.
Sub-item
MTR-CHK Checking the ADF motor and other individually
<Operating procedure>
1) Press MTR-CHK to reverse its display.
2) Enter a part corresponding number from the ten-key pad.
3) Press the OK key.
4) Press MTR-ON to check the motor operation.
<Setting range>
0 to 1
TRY-A4 Automatically adjusting document width detection by DF (A4
width)
TRY-A5R Automatically adjusting document width detection by DF (A5R
width)
TRY-LTR Automatically adjusting document width detection by DF (LTR
width)
TRY-LTRR Automatically adjusting document width detection by DF (LTRR
width)
FEED-CHK Checking ADF paper feed operation
<Operating procedure>
1) Press FEED-CHK to reverse its display.
2) Enter a part corresponding number from the ten-key pad.
3) Press the OK key.
4) Press FEED-ON to check ADF paper feed operation.
Paper feed mode
0: Simplex feed
1: Duplex feed
2: Simplex feed with stamping
3: Duplex feed with stamping
[Value at shipping: Factory adjustment value / Value after RAM
clearance: 0]
Description
T-16-49
Description
T-16-50
FEEDER >FUNCTION
Description
Level
2
Level
1
1
1
1
Level
1
1
1
1
1
1
0007-9924