Removing The Right Cover (Lower Front); Removing The Pickup Assembly 1 - Canon iR3570 Service Manual

Chapter 8
1) Match the hinge [1] found at the bottom of the right door against the lug.
2) Engage the hinge [2] found on the top of the right door with the hook
found on the side plate.
When tightening the 2 screws used to fix the hinge in place, be sure to close
the right door first.
8.8.13.3 Removing the Right Door
iR2270 / iR2870 / / iR2270N / / iR2870N / iR2230 / / / iR3530 /
1) Open the right door.
2) Remove the reuse band [1], and disconnect the connector [2].
3) Remove the 2 screws (M4x8; RS tightening), and detach the right door.
Attaching the Right Door
1) Match the hinge [1] found at the bottom of the right door against the lug.
2) Engage the hinge [2] found on the top of the right door with the hook
found on the side plate.
8-72
F-8-255
F-8-256
F-8-257
When tightening the 2 screws used to fix the hinge in place, be sure to close
the right door first.

8.8.13.4 Removing the Right Cover (lower front)

iR2270 / iR2870 / iR3570 / iR4570 / / iR2270N / / iR2870N / / iR3570N /
/ iR4570N / iR2230 / / / iR3530 /
0007-7347
1) Open the pedestal right door [1]. (if equipped with a Cassette Feeding
Unit-Y2)
2) Open the lower right door [2].
3) Remove the 2 screws [3], and detach the right cover (lower front) [4].

8.8.13.5 Removing the Pickup Assembly 1

iR2270 / iR2870 / iR3570 / iR4570 / / iR2270N / / iR2870N / / iR3570N /
/ iR4570N / iR2230 / / / iR3530 /
1) Slide out the cassette 1/2.
2) Disconnect the 3 connectors [1]; then, free the harness from the 2 wire
saddles [2] and the 2 clamps [3].
F-8-258
[2]
[1]
[4] [3]
F-8-259
0007-6669
0007-6670