Removing The Developing Assembly - Canon iR3570 Service Manual

Chapter 7
3) Shift the locking lever [1] to the left to release the developing assembly.
4) Remove the screw [1].
5) Remove the drum unit [1].
Be sure to hold the drum unit as shown.
7-18
F-7-64
F-7-65
F-7-66
F-7-67

7.12.3.5 Removing the Developing Assembly

iR2270 / iR2870 / iR3570 / iR4570 / / iR2270N / / iR2870N / / iR3570N /
/ iR4570N / iR2230 / / / iR3530 /
1) Remove the screw [1].
2) Shift the locking lever [1] to the left to release the developing assembly.
3) Slide the developing assembly [1] slightly to the front; then, disconnect
the connector [2].
F-7-68
F-7-69
F-7-70
0007-8353