Canon iR3570 Service Manual page 96

Chapter 2
3) Remove the 4 screws [1], and detach the face plate [2] of the host machine's rear cover.
4) Connect the cable [1] to the connector [2] of the host machine (intended for an NE controller).
5) Secure the controller [1] to the host machine's rear cover using 4 screws [2].
6) Take up the slack from the cable connecting the host machine and the controller; bundle the excess length on the controller side, and fix it in place using a harness
guide [1].
2-22
[2]
[1]
F-2-89
F-2-90
F-2-91
F-2-92