Removing The Cassette Size Sensor Relay Pcb; Manual Tray Assembly; Removing The Right Cover (Rear); Removing The Right Door - Canon iR3570 Service Manual

3) Remove the 4 screws [1], and take out the pickup unit 1 [2].

8.8.13.6 Removing the Pickup Assembly 2

iR2270 / iR2870 / iR3570 / iR4570 / / iR2270N / / iR2870N / / iR3570N /
/ iR4570N / iR2230 / / / iR3530 /
1) Slide out the cassette 1/2.
2) Disconnect the connector [1], and free the harness from the guide; then,
remove the 4 screws [2], and detach the pickup assembly 2 [3].

8.8.13.7 Removing the Cassette Size Sensor Relay PCB

iR2270 / iR2870 / iR3570 / iR4570 / / iR2270N / / iR2870N / / iR3570N /
/ iR4570N / iR2230 / / / iR3530 /
1) Remove the PCB cover [1] (snap-on).
F-8-260
F-8-261
F-8-262
F-8-263
2) Remove the cassette size sensor relay PCB [2] (3 connectors [2], 2 clamps
[3]).

8.8.14 Manual Tray Assembly

8.8.14.1 Removing the Right Cover (rear)

iR2270 / iR2870 / iR3570 / iR4570 / / iR2270N / / iR2870N / / iR3570N /
/ iR4570N / iR2230 / / / iR3530 /
1) Open the pedestal right door [1]. (if equipped with a 2-Cassette Pedestal-
Y2)
2) Open the right lower door [2].
3) Remove the 5 screws [3], and detach the right cover (rear) [4].
0007-6671

8.8.14.2 Removing the Right Door

iR3570 / iR4570 / / iR3570N / / iR4570N / iR2230 / / / iR3530 /
1) Open the right door.
0007-6672
2) Remove the screw [1], and detach the fixing plate [2].
F-8-264
[4]
[2]
[1]
F-8-265
F-8-266
Chapter 8
0007-6697
[3]
[3]
[3]
0007-6698
8-73