Canon iR3570 Service Manual page 105

3) Fit the 3 hooks [2] of the heater unit [1] to the slit of the base plate to match the hole positions.
4) Mount the heater unit [1] with the screw (binding; M4X6) [2], and connect the connector [3].
5) Attach the connector cover [1].
6) Attach the plastic film [2] (for protecting the AC cable) over the cable [3] to fit the end of the connector cover [A] and the end of the rear side of the host machine
[B].
F-2-114
In the case of mounting the heater unit, make sure to check that the 3 hooks
[2] are tightly fitted and there is no jiggle.
F-2-115
F-2-116
Chapter 2
2-31