Output Accessories System Configuration 1 - Canon iR3570 Service Manual

Chapter 1
[4]Buffer Path Unit-E1
[5]3 Way Unit-A1
[6]Accessories Power Supply-P2 (needed when
installing [1] through [4]; standard with 120/
230V model)
The following shows the functions that the system will provide and the accessories that will be needed:
Function provided
- 3-way delivery
- stapling
Function provided
- saddle binding
Function provided
- punching

1.1.4 Output Accessories System Configuration 1

iR2230 / / / iR3530
The configuration is as shown in the following figure:
[1]Finisher-S1
[2]3Way Unit-A1
[3]Output Tray-J1
[4]Accessories Power Supply-P2
[standard with 120 or 230 V model]
1-2
[4a]
[4]
[6a]
[6]
[1]
(It is necessary when installing [1].)
[4a]Instruction Sheet (indicating references)
[5a]Installation Procedure
- Installation of the 3 Way Unit-A1
[6a]Installation Procedure
- Installation of the Accessories Power Supply-P2
T-1-2
Accessory needed
Finisher-Q3 or Saddle Finisher-Q4
Accessories Power Supply-P2
Buffer Path Unit-E1
3 Way Unit-A1
T-1-3
Accessory needed
Saddle Finisher-Q4
Accessories Power Supply-P2
Buffer Path Unit-E1
3 Way Unit-A1
T-1-4
Accessory needed
Finisher-Q3 or Saddle Finisher -Q4
Accessories Power Supply-P2
Buffer Path Unit-E1
3 Way Unit-A1
Punch Unit-L1/M1/N1/P1
[1a]
F-1-2
T-1-5
[1a]Installation Procedure
- installation of the Finisher-S1
[2a]Installation Procedure
- installation of the 3Way Unit-A1
[3a]Installation Procedure
- installation of the Output Tray-J1
[4a]Installation Procedure
- installation of the Accessories Power Supply-P2
[3]
[3a]
[2]
[2a]
[5a]
[5]
0008-6920