Removing The Right Door - Canon iR3570 Service Manual

1) Match the hinge [1] found at the bottom of the right door against the lug.
2) Engage the hinge [2] found on the top of the right door with the hook
found on the side plate.
When tightening the 2 screws used to fix the hinge in place, be sure to close
the right door first.

8.8.9.3 Removing the Right Door

iR2270 / iR2870 / / iR2270N / / iR2230 / / / iR3530 /
1) Open the right door.
2) Remove the reuse band [1], and disconnect the connector [2].
3) Remove the 2 screws (M4x8; RS tightening), and detach the right door.
Attaching the Right Door
1) Match the hinge [1] found at the bottom of the right door against the lug.
2) Engage the hinge [2] found on the top of the right door with the hook
found on the side plate.
F-8-185
F-8-186
F-8-187
When tightening the 2 screws used to fix the hinge in place, be sure to close
the right door first.
8.8.9.4 Removing the Right Cover (lower front)
iR2270 / iR2870 / iR3570 / iR4570 / / iR2270N / / iR2870N / / iR3570N /
/ iR4570N / iR2230 / / / iR3530 /
0007-7339
1) Open the pedestal right door [1]. (if equipped with a Cassette Feeding
Unit-Y2)
2) Open the lower right door [2].
3) Remove the 2 screws [3], and detach the right cover (lower front) [4].
8.8.9.5 Removing the Pickup Assembly 1
iR2270 / iR2870 / iR3570 / iR4570 / / iR2270N / / iR2870N / / iR3570N /
/ iR4570N / iR2230 / / / iR3530 /
1) Slide out the cassette 1/2.
2) Disconnect the 3 connectors [1]; then, free the harness from the 2 wire
saddles [2] and the 2 clamps [3].
Chapter 8
F-8-188
[2]
[1]
[4] [3]
F-8-189
0007-6620
0007-6623
8-61