Removing The Developing Assembly - Canon iR3570 Service Manual

5) Remove the drum unit [1].
Be sure to hold the drum unit as shown.

7.12.10.5 Removing the Developing Assembly

iR2270 / iR2870 / iR3570 / iR4570 / / iR2270N / / iR2870N / / iR3570N /
/ iR4570N / iR2230 / / / iR3530 /
1) Remove the screw [1].
F-7-213
F-7-214
F-7-215
F-7-216
2) Shift the locking lever [1] to the left to release the developing assembly.
3) Slide the developing assembly [1] slightly to the front; then, disconnect
the connector [2].
4) Remove the developing assembly [1].
0007-8377
Be sure to hold the developing assembly as shown.
Chapter 7
F-7-217
F-7-218
F-7-219
7-39