Removing The Right Door - Canon iR3570 Service Manual

[2]
[1]

8.8.17.2 Removing the Right Door

iR3570 / iR4570 / / iR3570N / / iR4570N / iR2230 / / / iR3530 /
1) Open the right door.
2) Remove the screw [1], and detach the fixing plate [2].
3) Remove the joint shaft [1], and free the extension delivery unit [2] from
the right door.
4) Disconnect the connector [1], and remove the reuse band [2]; then, remove
the 2 screws (M4x8; RS tightening).
[3]
[3]
[3]
[4]
F-8-314
F-8-315
F-8-316
F-8-317
5) While freeing the hinge assembly [2], detach the right door.
0007-6676
Attaching the Right Door
1) Match the hinge [1] found at the bottom of the right door against the lug.
2) Engage the hinge [2] found on the top of the right door with the hook
found on the side plate.
When tightening the 2 screws used to fix the hinge in place, be sure to close
the right door first.
8.8.17.3 Removing the Right Door
iR2270 / iR2870 / / iR2270N / / iR2870N / iR2230 / / / iR3530 /
1) Open the right door.
Chapter 8
F-8-318
F-8-319
F-8-320
0007-7355
8-81