1.1 System Construction
1.1.1 Overview of the System with a Delivery Accessory
iR2270 / iR2870 / iR3570 / iR4570 / / / /
The system may include a delivery accessory that may enable any of the following three:
- if a large volume of delivery processing or multiple types of delivery processing (e.g., stapling, punching) is needed: delivery accessory system configuration 1
- if delivery processing is limited to stapling/punching: delivery accessory system configuration 2
- if delivery processing is limited to 3-way delivery: delivery accessory system configuration 3
1.1.2 Overview of System Construction (output accessories)
iR2230 / / / iR3530
The output accessories designed for the machine can broadly be divided into 2 groups:
- if the work is limited to stapling and the like, output accessories configuration 1
- if the work calls for 3-way sorting, output accessories system construction 2
1.1.3 Delivery Accessory System Configuration 1
iR2270 / iR2870 / iR3570 / iR4570 / / / /
The following shows a typical system configuration of this type:
Remarks:
The 3 Way Unit-A1 comes as standard with the following:
120V: all model
230V: iR4570, iR3570
[1a]
[1]Finisher-Q3
[2]Saddle Finisher-Q4
[3]Punch Unit-L1/M1/N1/P1
[6]
[1]
[3a]
[2a]
[2]
[6a]
[4]
[3]
F-1-1
T-1-1
[1a]Installation Procedure
- Installation of the Finisher-Q3
- Installation of the Buffer Path Unit [4]
[2a]Installation Procedure
- Installation of the Finisher-Q4
- Installation of the Buffer Path Unit [4]
[3a]Installation Procedure
- Installation of the Punch Unit-L1/M1/N1/P1
[5]
[5a]
[4a]
Chapter 1
0006-6215
0008-6919
0006-6221
1-1