5) Detach the cover [1] from the PCB.
6) Detach the size sensor [1] from the PCB.
8.8.8 Cassette Retry Paper Sensor
8.8.8.1 Removing the Right Cover (rear)
iR2270 / iR2870 / iR3570 / iR4570 / / iR2270N / / iR2870N / / iR3570N /
/ iR4570N / iR2230 / / / iR3530 /
1) Open the pedestal right door [1]. (if equipped with a 2-Cassette Pedestal-
Y2)
2) Open the right lower door [2].
3) Remove the 5 screws [3], and detach the right cover (rear) [4].
F-8-158
F-8-159
F-8-160
8.8.8.2 Removing the Right Door
iR3570 / iR4570 / / iR3570N / / iR4570N / iR2230 / / / iR3530 /
1) Open the right door.
2) Remove the screw [1], and detach the fixing plate [2].
0007-6611
3) Remove the joint shaft [1], and free the extension delivery unit [2] from
the right door.
4) Disconnect the connector [1], and remove the reuse band [2]; then, remove
the 2 screws (M4x8; RS tightening).
[4]
[2]
[1]
F-8-161
F-8-162
F-8-163
F-8-164
Chapter 8
[3]
[3]
[3]
0007-6612
8-57