Error Codes Overview - Canon Colorado 1650 Operation Manual

Error codes overview

Introduction
When an error occurs you will see an information icon on the operator panel. Click on the icon to
find information on the error.
NOTE
When a job requires a license or a hardware kit such as FLXfinish
missing, the job will not appear on the operator panel. The controller will not give an error code.
In the table below you find the most common error codes.
Num Error code
ber
1 5713
2 1701
1702
1705
5709
3 1760
1761
5760
5761
Message
Cannot read markers
for media step control
Carriage crash
Carriage position error
during home
+
and that license or kit is
Action
• Clean the M&C scanner, see
the M&C scanner on page
• Use the advanced black markers.
• Clean the media or use different me-
dia.
• Clean the platen and the buffer plate,
Clean the platen on page 197
see
Clean the buffer plate on page
• Clean the ruler, see
page 259.
• Check the fan settings.
• Use uncurled or undamaged media.
• Use the correct winding mode.
• Use recommended media and pro-
files from Canon media guide web-
site.
• Make sure media is not damaged or
curled.
• Make sure the media can be transpor-
ted well.
• Check if the carriages can move free-
ly (i.e. is not blocked).
• Check if the platen is clean. For more
Clean the platen on
information see
page 197.
Chapter 9 - Troubleshooting and support
Error codes overview
Clean
194.
and
200.
Clean the ruler on
4
367