Control Panel Inverter Pcb - Canon iR3570 Service Manual

10.5.6 Control Panel Inverter PCB

10.5.6.1 Removing the Control Panel
iR2270 / iR2870 / iR3570 / iR4570 / / iR2270N / / iR2870N / / iR3570N /
/ iR4570N
1) Remove the rubber cap [1], and remove the screw [2].
2) Open the right door [1].
3) Remove the 2 screws [1].
4) Slide the control panel [1] in the direction of the arrow.
5) Free the harness [2] from the clamp [1].
F-10-70
F-10-71
F-10-72
F-10-73
0007-6428
6) Disconnect the connector [1], and detach the control panel.
10.5.6.2 Removing the Control Panel Base Cover
iR2270 / iR2870 / iR3570 / iR4570 / / iR2270N / / iR2870N / / iR3570N /
/ iR4570N
1) Remove the 4 screws [1], and detach the control panel base cover [2].
10.5.6.3 Removing the Control Panel Inverter PCB
iR2270 / iR2870 / iR3570 / iR4570 / / iR2270N / / iR2870N / / iR3570N /
/ iR4570N
1) Remove the control panel inverter PCB [1]. (3 connectors [2], 4 screws
[3])
10.5.6.4 Removing the Control Panel
iR2230 / / / iR3530 /
1) Open the right door [1].
Chapter 10
F-10-74
F-10-75
F-10-76
F-10-77
0007-6430
0007-6466
0009-2841
10-23