Figure 1-32 Location Of The Power Button - Silicon Graphics Origin 350 User Manual

007-4566-001
3. Press the power buttons or power switches on each of the modules that you want to
power on in the following order:
a. For the PCI expansion module or a NUMAlink module, press the power switch
on the module's rear panel to the ON (
controller. Then, push in the On/Off switch with LED in the front of the module
to power on the rest of the module's internal components.
Note: The Origin 350 base and AC-powered NUMAlink modules do not have a
power switch. To power on their L1 controllers, plug the modules to the PDU.
b. For the TP900 storage module, press the power button on its rear panel to ON
( ).
I
c. For the MPX module, the base compute module, and the system expansion
compute module, press the power button with the LED on the front panel of
each module (see Figure 1-32).
Figure 1-32 Location of the Power Button
) position to start the module's L1
I
Power button
with LED
Operating the Server System
57