Installation And Operation - Silicon Graphics Origin 350 User Manual

1.
007-4566-001
Chapter 1

Installation and Operation

This chapter describes how to install and operate your SGI Origin 350 server system.
Specifically, the following topics are covered:
• "System Installation Overview (the Road Map)" on page 2
• "Safety Precautions" on page 3
• "Installing a Rack" on page 5
• "Unpacking and Inspecting Server System Modules" on page 23
• "Setting the Server System on a Table Top" on page 23
• "Installing the Server System in a Rack" on page 25
Note: The rackmounting kit enables the module to be mounted in an SGI rack and
in an industry-standard 19-inch wide rack.
• "Cabling the System Modules to Each Other" on page 45
• "Cabling the Server System to a Power Source" on page 48
• "Connecting the System Console" on page 51
• "Operating the Server System" on page 53
1