Related Publications - Silicon Graphics Origin 350 User Manual

About This Guide

Related Publications

xxii
This section lists various information sources and explains how to access them. The
following SGI publications relate to the Origin 350 server system:
• SGI Origin 350 Server System User's Guide (this manual) (hard copy shipped with the
system and available online) (007-4566-00x). Use this guide to become acquainted
with your server and to learn how to operate and monitor the server system. In
addition, this guide contains information on installing the server system in a
19-inch rack, cabling the system, and replacing PCI and PCI-X cards, disk drives,
power supplies, DIMMs, and an L1 display.
Warning:
To ensure your safety and protect your system, do not add or replace
any components that this guide does not designate as customer replaceable.
Contact your SGI system support engineer (SSE) to install any hardware
components that are not designated as customer replaceable in this guide.
• IRIX Admin Software Installation and Licensing Guide (hard copy shipped with system
and available online) (007-1364-xxx). This is the complete reference guide on using
the installation program, inst, to install software. For information on using the
Software Manager to install software, see the online Personal System Administration
Guide.
• SGI L1 and L2 Controller Software User's Guide (007-3938-00x) (hard copy shipped
with system and available online). This guide describes the L1 and L2 controller
functions, commands, and error messages that you may need to operate and
maintain your system.
• PCI Expansion Module User's Guide (5.0-V Support and/or 3.3-V Support)
(007-4499-00x). This guide describes the 4U PCI expansion module, which is an
optional module that adds 12 PCI slots (but no processors, or memory, and no IO9
card) to your system.
• SGI Total Performance 900 Storage System User's Guide (007-4428-00x). This guide
describes the SGI TP900 storage module, which provides additional storage to the
Origin 350 server system.
• SGIconsole Hardware Connectivity Guide (007-4340-00x) (optional). This guide
describes how to connect an SGIconsole to your Origin 350 server system and other
systems supported by the SGIconsole. You use the SGIconsole to manage and
monitor your graphics systems.
007-4566-001