Post Errors; Acpi Mode; Power Button Behavior; Resume On Modem Ring - Silicon Graphics Altix XE250 User Manual

5: BIOS Settings

POST Errors

ACPI Mode

Power Button Behavior

Resume On Modem Ring

EFI OS Boot

Keyboard on Now Function

Power Loss Control

5-122
Set to Enabled to display POST Error Messages if an error occurs during bootup. If set to
Disabled, the system will continue to boot without displaying any error message even when a boot
error occurs.
Use this setting to determine if you want to employ ACPI (Advanced Configuration and Power
Interface) power management on your system. The options are Yes and No.
If set to Instant-Off, the system will power off immediately as soon as the user hits the power
button. If set to 4-sec., the system will power off when the user presses the power button for 4
seconds or longer. The options are instant-off and 4-second override.
Select On to "wake your system up" when an incoming call is received by your modem. The
options are On and Off.
If enabled, this feature provides support for EFI OS booting. The options are Enabled and
Disabled.
This feature allows the user to determine how to use the keyboard to power on the system from
S3~S5 States. Select Space to allow the user to power on the system by pressing the space bar.
Select Password to allow the user to enter the password to power on the system. Select Disabled
to disable this function.
The feature allows the user to set the power state after a power outage. You can select Stay Off for
the system power to remain off after a power loss. Select Power On for the system power to be
007-5467-001