Silicon Graphics Origin 350 User Manual page 89

Operating the Server System
To enter console mode, press Ctrl+D at the L1 prompt, as follows:
001c01-L1> Ctrl+D
entering console mode 001c01 console, <CTRL-T> to escape to L1
.
<system output appears here>
.
To return to L1 mode, press Ctrl+T, as follows:
Ctrl+T
escaping to L1 system controller
001c01-L1>
At this point, you can enter any L1 command. When the command completes execution,
the L1 returns to console mode:
re-entering console mode 001c01 console, <CTRL-T> to escape to L1
To permanently engage the L1 mode, press Ctrl+T and then enter the l1 command, as
follows:
Ctrl+T
escaping to L1 system controller
001c01-L1> l1
L1 command processor engaged, <CTRL-D> for console mode.
001c01-L1>
007-4566-001 63