4024-110
MPF transport pinch roll assembly removal
1.
Remove the MPF rear cover. Go to
2.
Remove the MPF feed unit assembly. See
3.
Remove the two end screws securing the upper bracket (A) to the MPF feed unit assembly.
4.
Remove the upper bracket (A).
5.
Remove the center screw securing the MPF transport pinch roll assembly (B) to the upper bracket (A).
6.
Release the bosses securing the MPF transport pinch roll assembly (B) to the upper bracket.
7.
Remove the MPF transport pinch roll assembly (B) by moving it in the direction of the arrow.
Note: Do not touch the plastic surface of the MPF pinch roll.
Note: The bushings and the springs may become detached.
Note: Before reinstalling, ensure you do not touch the plastic roll surface.
4-54
Printer Service Manual
"MPF rear cover removal" on page
"MPF feed unit assembly removal" on page
A
Boss
Boss
4-55.
B
Left
Previous
4-51.
Next
Go Back