Carriage Card, Carriage Card Holder Cover Removal - Lexmark Jetprinter 4079-00 series Service Manual

4079-00X

Carriage Card, Carriage Card Holder Cover Removal

1. Remove the covers.
2. Center the carriage (see
Centering" on page
3. Remove the printhead cover and the printheads.
4. Remove the carriage card holder cover:
Carefully push the small latches (1) on both sides.
Lift off the carriage card holder cover (2).
5. With a small screwdriver, lift the beige connector latches and
detach the carriage card cables. All three ribbon cables are dif-
ferent sizes. The print timing encoder and the paper width sen-
sor are both connected to the same ribbon cable.
"Printhead Uncapping and Carriage
4-9).
Repair Information
4-12