Paper Feed Roller Replacement - Ricoh SP5 Series Service Manual

June 30, 1998

6.8.3 PAPER FEED ROLLER REPLACEMENT

1. Turn off the main switch.
2. Remove the paper tray which the feed rollers need replacing for. (Refer to
Paper Tray Removal.)
3. Remove the pick-up roller [A] (1 snap ring).
4. Remove the feed roller [B] (1 snap ring).
5. Remove the snap ring [C] for the separation roller [D], then separate the
separation roller [D] from the torque limiter [E].
6. After installing new rollers, reset the copy counter for the paper tray (SP 7-816).
NOTE: 1) The paper feed (pick-up, feed, separation) rollers used in the 1st ~ 3rd
feed units in the paper tray unit are different from the feed rollers used in
the by-pass feed table and 3.5 k LCT.
2) Do not touch the surface of the rollers with bare hands.
[E] [D]
6-63
[B]
[A]
[C]
A229R598.WMF
PAPER FEED