4. Replacement and Adjustment
Adjustment after Replacement
Printing
• Make sure the paper is installed correctly in each paper tray before you start these adjustments.
• Print the registration page (page 186 "Test Pattern Printing") to use for these adjustments.
Registration - Leading Edge/Side-to-Side
A: Leading edge registration (3 ± 2 mm)
B: Side-to-side registration (2 ± 1.5 mm)
1.
Check the leading edge registration [A] for each paper feed station, and adjust them
using SP1-001.
Tray
Tray: Plain
Tray: Mid Thick
Tray: Thick
Bypass: Plain
Bypass: Mid Thick
Bypass: Thick
140
SP No.
SP1-001-002
SP1-001-003
SP1-001-004
SP1-001-007
SP1-001-008
SP1-001-009
Threshold
4.2 ± 1.5 mm
4.2 ± 1.5 mm