Add Lamp Window - Christie Solaria CP2220 User Manual

Section 3: Operation

Add Lamp Window

Table 3.19 Advanced Setup: Add Lamp Window
Control
Type
Serial Number
Reason for
Change
Lamp Expiry
Hours Used
3-32
Figure 3-22 Advanced Setup: Add Lamp Window
Description
In the Type list, select the lamp type.
In the Serial Number box, click the Launch Dialog button to enter the serial number of the
new lamp. A serial number can be up to 128 alpha-numeric characters.
In the Reason for Change list, select a preset reason as to why you are installing this lamp or
click the Launch Dialog button to enter the reason.
In the Lamp Expiry box, click the Launch Dialog button to enter the number of hours in which
the lamp will expire. The default value is 2000 hours for all lamps.
In the Hours Used box, click the Launch Dialog button to enter the number of hours on the
lamp. The value defaults to zero assuming a new lamp is being installed. If a used lamp is being
inserted, enter the number of hours already on the lamp.
CP2220 User Manual
020-100420-06 Rev. 1 (03-2011)