Track Lamp Intensity With Liteloc; Lamp Details; Record New Lamp Information; Add Lamp End-Of-Life Indicator - Christie D4K2560 User Manual

Track lamp intensity with LiteLoc

Use the LiteLoc feature to maintain a constant level of brightness over the lifetime of the lamp.
1. On the touch panel controller, tap Menu > Lamp > Lamp Power.
2. To adjust the lamp power, use the slider or enter a value until the display is as bright as
required.
3. Tap OK.
4. Tap Lamp Mode.
5. Tap Constant Intensity.
Notice the Lamp Power option is greyed out so you cannot adjust it. To readjust the lamp
power, select Lamp Mode > Lamp Power. From the Lamp Power option, adjust the power
setting as applicable.

Lamp details

Lamp Type
CDXL-20 (2.0 kW)
CDXL-20SP (2.0 kW)
CDXL-30 (3.0 kW)
CDXL-30SD (3.0 kW)
CDXL-30SP (3.0 kW)

Record new lamp information

The lamp serial number is an alphanumeric, user-defined field. Christie recommends choosing a
i
distinct and descriptive name for every individual lamp.
1. On the touch panel controller, tap Menu > Lamp > Change Lamp.
2. Enter a Lamp Type, Serial Number and Hours Used.
3. Tap Apply Lamp Change.
4. Tap Continue.

Add lamp end-of-life indicator

Specify the number of hours remaining before issuing an end-of-life indicator for the lamp.
1. On the touch panel controller, tap Menu > Lamp > Lamp life warning at (hours).
2. To specify the number of hours remaining before issuing an end-of-life indicator, enter a value
or use the plus and minus buttons to increase or decrease the value.
D4K2560 User Manual
020-101076-04 Rev. 1 (01-2015)
Replace Before Min. Lamp Power
2400 hours 1000W (50%)
3200 hours 1400W
1500 hours 2000W (67%)
1500 hours 2100W
1900 hours 2100W
Operation
Max. Lamp Power
2200W (110%)
2000W
3300W (110%)
3000W
3000W
47