Administrator Setup: Preferred Test Pattern Setup Window - Christie Solaria CP2220 User Manual

Table 3.27 Administrator Setup: Preferred Channel Selection Window
Control
1: All Channels
2: Selected
Channel Buttons
3: Trash Can
To Add a Channel
To add a channel button, drag the button from the All Channels region (left side of graphic in Figure 3-35)
and place it on top of a button in the Selected Channel Buttons region (right side of graphic in Figure 3-35).
Buttons in this region can be dragged on top of one another to switch button locations.
To Delete a Channel
To remove a channel from the Selected Channel Buttons region (right side of graphic in Figure 3-35), drag
and drop the channel on top of the trash can. This defines an empty channel on the Main panel. Channels
dragged to the trash can cannot be retrieved. You need to add the channel from the All Channels region once
again.

Administrator Setup: Preferred Test Pattern Setup Window

The Preferred Test Pattern Setup window enables the management and organization of all available test
patterns. Patterns in the User Selected region (right side of graphic in Figure 3-36) are available to you via the
Test Pattern button on the Main panel.
Figure 3-36 Administrator Setup: Preferred Test Pattern Setup Window
CP2220 User Manual
020-100420-06 Rev. 1 (03-2011)
Description
An alphabetical list of all 64 channels to choose from.
A list of the nine buttons that display on the Main panel of the TPC. Buttons in this region can be
dragged on top of one another to switch button locations.
Used to delete a channel from the Selected Channel Buttons region.
1
3
4
2
5
Section 3: Operation
6
3-47