Christie Solaria CP2220 User Manual page 111

Steps to Perform Marriage
1. Ensure the system is in full power mode to proceed, i.e. Power is ON. Click the Next button to proceed to
the Marriage Checklist window. (Figure 3-53).
2. In the Marriage Checklist window, the system checks that all tamper switches are secure and lists the
items that you must check to ensure the projector is secure before proceeding. Click the Next button to
proceed to the Arming window.
3. In the Arming window, click the Arm Marriage button. (Figure 3-54). A 30 second count-down timer
begins. The LED in the Marriage button on the PI Board will flash green during this count-down. You
MUST press the Marriage button on the PI Board within this 30 second window in order for the marriage
to take effect. When the Marriage button is pressed, the LED button will change to a solid green to
indicate a successful marriage.
CP2220 User Manual
020-100420-06 Rev. 1 (03-2011)
Figure 3-53 Administrator Setup: Marriage Checklist Window
Section 3: Operation
3-67