Connecting Sources - Christie Solaria CP2220 User Manual

2.5

Connecting Sources

Cinema servers, such as digital media storage devices or non-cinema sources such as PCs reside outside the
projector and are connected to one of the ports on the Projector Intelligence Board (PIB) located on the left
(operator's) side of the projector.
These communication ports are accessible by first removing the side source and communication access panel.
When connecting sources or servers, route all cables along the channel ways located on the bottom of the
projector and up through the opening in the frame to the communication connection port.
Replace the access panel to ensure server and source connections remain secure.
CP2220 User Manual
020-100420-06 Rev. 1 (03-2011)
From Cinema
Cinema Server
Connect to Ethernet hub
Figure 2-15 Connecting Cinema Sources
Section 2: Installation and Setup
OR
Server
Connect to AC at site
2-13