Christie Solaria CP2220 User Manual page 92

Section 3: Operation
Table 3.28 Administrator Setup: Preferred Test Pattern Setup Window
Control
1: Unselected
Patterns
2: User
Selected
3: Test Pattern
Off
4: Test
5: Full Screen
6: Trash Can
To Add a Test Pattern
To add a test pattern, drag a test pattern from the Unselected Patterns region (left side of graphic in Figure 3-
36) and drop it in the User Selected region (right side of graphic in Figure 3-36). If the Test Pattern is added, it
will be removed from the Unselected Patterns region.
To Delete a Test Pattern
To remove a test pattern from the User Selected region, drag and drop the test pattern on top of the trash can.
Test Patterns dragged to the trash can cannot be retrieved. You need to add the test pattern from the Unselected
Patterns region once again.
3-48
Description
An alphabetical list of all available test patterns for display by the projector for you to choose from. If
a pattern is dragged to the User Selected region, it will be removed from this list.
A list of test patterns specifically selected by the user. This list is displayed when you click the Test
Pattern button on the Main panel.
The Test Pattern Off button stops displaying the test pattern currently displayed by the projector.
The Test button displays the selected test pattern on-screen regardless if the selected test pattern is in
the Unselected Patterns region (left side of graphic in Figure 3-36) or User Selected region (right
side of graphic in Figure 3-36).
Select the Full Screen check box to display the test pattern full screen, 2048 x 1080. If the Full
Screen check box is clear, the test pattern will show in native resolution which may not fill the projec-
tion area.
Used to delete a test pattern from the User Selected region.
CP2220 User Manual
020-100420-06 Rev. 1 (03-2011)