Power; Projector Does Not Power On - Christie Solaria CP2220 User Manual

5 Troubleshooting
If the projector does not appear to be operating properly, note the symptoms and use this section as a guide. If
the problem can not be resolved, contact your dealer for assistance. NOTE: A qualified service technician is
required when opening an enclosure to diagnose any "probable cause".
5.1

Power

5.1.1 Projector Does Not Power ON

1. Check the wall circuit breaker to see if it's ON. If there is a
problem with the wall circuit breaker "tripping" OFF, have a
certified electrician investigate any electrical problem.
2. Check the status of the LEDs on the rear corners of the projector.
(Figure 5-1). If there is no activity, see #3.
3. Verify power by looking through the rear, right side grill. One
LED should be present in the upper right. This indicates the
LVPS has power. Another LED should be seen in the lower left
indicating Main input. (Figure 5-2)
Main Input LED
4. On the TPC, verify in the Operational Status region of the Main panel that there is no failure with PIB
communication (PIB Status).
CP2220 User Manual
020-100420-06 Rev. 1 (03-2011)
Figure 5-2 View Power Status LEDs
Figure 5-1 Projector Status LEDs
LVPS Power LED
5-1