Administrator Setup: Content Devices Configuration - Christie Solaria CP2220 User Manual

Section 3: Operation
Region
3: Alarm
Triggers
4: Touch-
screen
Preferences

Administrator Setup: Content Devices Configuration

The Content Devices Configuration window allows you to select whether a Link Decryptor (LD) has been
installed or an IMB, or both for content configuration.
1
Figure 3-38 Administrator Setup: Content Divices Configuration Window
Table 3.30 Administrator Setup: Content Devices Configuration
Region
1: LD
Installed
3-50
Control
Over Temperature, Fan
Failure, Lamp Rotation,
Lamp Expiry, LD Log
Warning
Brightness
Calibrate Screen
Control Description
Select this if a Link Decryptor (LD) has been installed. NOTE: If a LD
LD
has been installed and this is not checked the projector will display a
warning.
Description
Select the Alarm Triggers check boxes for the conditions you want to
trigger an alarm window. Interlocks, communication faults, DMD over-
temperature and lamp failure are all permanent triggers. It is strongly
recommended all triggers remain selected during normal operation. The
Lamp Rotation alarm is triggered when the Lamp Expiry value has
reached 50%. The Lamp Expiry alarm is triggered when the Lamp
Expiry value that was entered when installing the lamp is reached. The
LD Log Warning alarm is triggered when the Link Decryptor logs are
almost full.
Use the scroll bar to adjust the brightness settings of the touchscreen
display.
Click the Calibrate Screen button and follow the on-screen instruc-
tions to touch and hold the red dot until calibration is complete.
2
CP2220 User Manual
020-100420-06 Rev. 1 (03-2011)