Diagnostics: Dlp Management Window - Christie Solaria CP2220 User Manual

Control
Retrieve Logs
Download to USB

Diagnostics: DLP Management Window

The DLP Management window has controls for interacting with the TI Integrated Cinema Processor (ICP)
electronics such as allowing you to turn off communication with the DLP hardware, copying the ICP/LD
certificates, resetting the ICP board, and running a number of ICP and LD self tests.
Table 3.10 Diagnostics: DLP Management Window
Control
Stop DLP
Communication
Download ICP
Certificate
Download LD
Certificate
Reset DLP
DLP Self Test
CP2220 User Manual
020-100420-06 Rev. 1 (03-2011)
Description
Click to display the log information.
Click to download the system log information that displays on-screen to a USB drive. Open the
back flap of the TPC to gain access to the 2 USB ports.
Figure 3-11 Diagnostics: DLP Management Window
Description
Turns off communication to the DLP hardware (Integrated Cinema Processor and Link
Decryptor). When the Stop DLP Communication check box is selected, communica-
tion commences.
Allows you to copy the ICP certificate to a file on the USB drive. Open the back flap of the
TPC to gain access to the USB ports. If no USB drives are found, an error returns.
Allows you to copy the LD certificate to a file on the USB drive. Open the back flap of the
TPC to gain access to the USB ports. If no USB drives are found, an error returns.
Resets the ICP board. NOTE: Ensure to reset the DLP when a movie is NOT playing since
this will interrupt the playing content.
Run a number of ICP and LD self tests of the DLP hardware and reports the results on-
screen.
Section 3: Operation
3-19