Tpc Windows; Status Window - Christie Solaria CP2220 User Manual

Section 3: Operation
3.5

TPC Windows

3.5.1 Status Window

The Status window allows you to view read-only status information organized in groups of items where each
item displays in a row of the form: LED, name, and value. The LED can be one of three colors: green, yellow,
or red.
A green indicator signifies normal operation.
A yellow indicator signifies an unusual environmental condition, such as the lamp reaching a set limit of hours
in use. It can also indicate a temperature having reached a higher than normal (but not critical) level. This is a
warning state.
A red indicator can signify that 1) the environment has a serious problem or 2) a specific electrical component
is not detected or does not appear to be functioning properly. These errors require immediate attention.
If the Item or Value are too long for the cell, click the cell row to display the full item entries at the bottom of
the window. To adjust the width of the cells, move the mouse to the end of the Item heading and watch for the
cursor to change. Click and drag the cell to widen or shorten the width. Repeat this action at the end of the
Value heading. This resizing propagates to all categories while the Status window remains open. Closing the
Status window returns the cell spacing to the original width.
3-10
Figure 3-6 Status Window
CP2220 User Manual
020-100420-06 Rev. 1 (03-2011)