Administrator Setup: Preferences Window - Christie Solaria CP2220 User Manual

Administrator Setup: Preferences Window

The Preferences window provides access to various system parameters.
Table 3.29 Administrator Setup: Preferences Window
Region
1: General
2: TPC
Controls
CP2220 User Manual
020-100420-06 Rev. 1 (03-2011)
2
4
Figure 3-37 Administrator Setup: Preferences Window
Control
Temperature Units
Image
Orientation
Luminance Units
Language
Beep on Screen Press
Enable Screen Saver /
Screen Saver Delay
1
Description
Select whether to display the temperature displayed on the TPC win-
dows in Celsius or Fahrenheit, for example, the values in the Status:
Temperatures window.
Select the orientation of the image on the screen. This is for flipping the
image on the screen, for example if you install a projector upside down
on the ceiling and need to switch the orientation. The default is Normal
Front.
Select to display the luminance settings displayed on the TPC windows
in Foot Lamberts or Candela, for example, the Luminance value in the
Status: Lamp Info window.
Select to display the language of the TPC user interface and online help.
Select the Beep on Screen Press check box if you want to hear a
beep every time you touch the screen.
Select the Enable Screen Saver check box if you want to enter
screen saver mode after a specified time of no interaction. While in
screen saver mode, the screen is blank and the back light is off. In the
Screen Saver Delay list, select the amount of non-interaction time
before entering screen saver mode.
Section 3: Operation
3
3-49