A: Intelligent Lens System; Intelligent Lens System - Christie Solaria CP2220 User Manual

Appendix A: Intelligent Lens System
A.1 Intelligent Lens System
The optional Intelligent Lens System (ILS) automates the process of adjusting the Focus, Horizontal (X) and
Vertical (Y) Offset, and Zoom in real-time using a motorized lens mount. ILS settings are saved in a file called
ILS Flat, ILS Scope, or a user-defined file(s) where each channel specifies the ILS file to use. For more
information on channel settings, refer to
When the ILS is installed (
you can choose if you want to move the lens when the channel changes or have the lens remain in the current
position regardless if the channel changes. Ensure the projector is fully assembled and powered up in its final
location before making any ILS adjustments. Also, ensure the proper lens type is selected from the Advanced
Setup: Lens Setup window.
CP2220 User Manual
020-100420-06 Rev. 1 (03-2011)
Motorized Vertical Offset
Horizontal Boresight Bolt
Horizontal Offset Knob
Motorized Horizontal Offset
Figure A-1 Anatomy of the Lens Mount
check box in the Advanced Setup: Lens Setup window is selected),
ILS Installed
Channel Setup: Config 1 Window, on page
Vertical Offset Knob
3-22.
Motorized Zoom
Anchor Bolt
Lock/Unlock Lens
Focus
Vertical Boresight
A-1