Administrator Setup: Gpio Setup Window - Christie Solaria CP2220 User Manual

Administrator Setup: GPIO Setup Window

The GPIO Setup window allows for the configuration of both input and output GPIO functions. For GPI, the
system can be configured to trigger a specific pin either on a rising or falling edge. When the configured
trigger is received, the function associated with that pin will be executed. Similarly when a specified function
is activated on the projector, like the switch to a channel or the lamp turning on, a specified pin can be
configured to send a rising of falling edge signal.
Table 3.33 Administrator Setup: GPIO Setup Window
Region
1: Inputs Actions
2: Output Actions
CP2220 User Manual
020-100420-06 Rev. 1 (03-2011)
1
Figure 3-42 Administrator Setup: GPIO Setup Window
Control Description
Rising Edge
In the Rising Edge list, select the rising edge option which will send the signal
to execute the selected function.
Falling Edge
In the Falling Edge list, select the falling edge option that will execute when the
selected signal is received.
Trigger
In the Trigger list, select the trigger that will be sent when the selected function
is activated.
Output
In the Output list, select the output that will trigger the GPO signal to be sent.
2
Section 3: Operation
3-55